thick

(redirected from thickest)
Also found in: Dictionary, Thesaurus, Medical, Legal.

thick

1. mod. stupid; thickheaded. She’s sort of thick, but she means well.
2. mod. involved (with someone). They’re thick as can be.
3. mod. unbelievable. This story is too thick for me. I’m cruising outa here.
See:
References in periodicals archive ?
The temperatures of thickest and medium thickness diesel layers were even lower than temperature of the water that was surrounding them.
The skin of the dorsum was the thickest, having both the thickest dermis and hypodermis.
If you want to get approved on standard multilayer (rigid) materials, you must submit various samples of multilayer boards, using the thinnest and thickest dielectrics, and the thinnest and thickest copper weights, with the thinnest and thickest multilayer constructions that you wanted approved.
UFOMAMMUT Lucifer Songs (Rocket)--The mammoth of doom drone has returned with Ufomammut's thickest monolith yet.
The format has now been changed to include secret nominations by friends and family and it seems just a bit too cruel - even for the thickest of skins.
75mm (at the thickest part), almost half that of conventional displays, and the weight of 146g, about 35% less.
The thickest and strongest branches in the industry are now extended in Plastic Trends' 4" and 6" branches.
Then, in the mid-1700s, commercial hunters discovered the value of the otter's luxurious fur--the thickest in the animal kingdom.
Simply insert the tip of the sensor into the thickest part of the meat.
In the afternoon, when carbon monoxide was thickest in the air surrounding the channel, the gas was also most abundant in people's blood.
The turkey breast temperature should reach 170 degrees in the thickest part of the breast.
After the thickest material is spooled, the linear pitch may be dialed down to meet application requirements for thinner materials.
Three millimeters is about the limit if you want repeatable, effective welds with no material burn-back," says Mees, "while 8 mm is the thickest section we use.
Extrusion through the quadratic face-relieved die, shown in figure 5, resulted in a pronounced minimum in the velocity profile at the thickest portion of the die, and improved fill on the left edge of the die.