cut (someone or something) with (something)

(redirected from cutting with)

cut (someone or something) with (something)

1. To cut or gash a part of the body on something sharp or dangerous Here is a sharper knife, but please be careful not to cut yourself with it.
2. To slice or chop something with a particular tool or implement. You'll only be able to cut that rind with a sharper knife.
3. To add a substance to something in order to dilute it. Be sure to cut that juice with water before you give it to the kids. If the coffee is too strong, try cutting it with cream and sugar.
See also: cut

cut someone or something with something

 and cut someone or something on something
to slice someone or something with or on something. Don't cut yourself on that sharp blade. He cut the bread with a dull knife and crushed it.
See also: cut

cut something with something

to dilute something with something else. They cut the liquor with cold water. Please cut this with some soda. It's too sweet, otherwise.
See also: cut
References in periodicals archive ?
However, this is different when cutting with AWJ technology, where the size of the chamfer increases with the increased average speed of the cutting head.
5 for cutting steel with thickness 15 mm it is obvious that the chamfer when cutting with DWJ technology is significantly lower than with AWJ technology.
The large chamfer is noticeable in the figure, which is produced when cutting with AWJ technology.
Only when cutting steel with thickness 15 mm using DWJ technology were lower Ra values achieved than when cutting with AWJ technology.
The results shown refer to cutting with a power P = 430 W and with various cutting speeds.
Be aware, though, that cutting with a dry-cut diamond blade creates a lot of dust and noise.
Feature double-shear cutting with uniform 0.002 to 0.004 knife clearance, class "0" precision bearings, easily removed screen, and a rollaway top for knife maintenance.
Beavers also showed patterns of cutting with respect to the size of the tree.
Guillotines, pinch-off type cutters, paper cutters and hand cutting with a knife have been the most prominent choices.
The cutting temperature was approximately 150[degrees]C lower than the temperature recorded by cutting with the non-rotating tool.
The resultant cutting force of rotary tool was approximately 20% lower than the cutting force recorded by cutting with a non-rotating tool.
The minimum temperature was approximately 150[degrees]C lower than the temperature recorded by the cutting with a non-rotating tool.
AE monitoring in laser cutting with the PZT contact sensors makes it possible to efficiently control the quality of laser cutting.
Feature double-shear cutting with uniform 0.002 to 0.004 knife clearance, class "O" precision bearings, easily removed screen, and a rollaway top for knife maintenance.
This saw is a compromise between two specialized saws - "rip saws," which excel at rapidly cutting boards to width (cutting with the grain) and cross cut saws," which excel at cleanly cutting boards to length (working across the grain).