References in periodicals archive ?
Dan Riccio, Apple's engineering lead, acknowledged, "The bottom line is that if you use enough force to bend an iPhone, or any phone, it's going to deform.
The measured spring-back angles or bend angle inaccuracies after bending were relatively low.
diversicolor--very good bend (wood failure level 2).
Offensive player of the year - Shawn Mitchell, North Bend, and Jacob Mitchell, Siuslaw.
If the circuit is used for a continuous flex application, plating at the bend area is not recommended.
Storyline: Signed as a nondrafted free agent out of Arizona State in 2003, Liebeck was dominant at Single-A South Bend (Ind.
Therefore, on approach to any bend select the speed at which you can safely hold the same line through the bend.
Gee's Bend became known for quilting during the mid-1960s when the women set up the Freedom Quilting Bee to help out the town when it fell on hard times.
A 90-degree bend is achieved by bending to the max and pulling back to 90, by hand.
2) knees bend only as much as necessary to make the correct position in the air
now, lower your legs slowly into an extreme back bend so your feet touch your chin
Included in the sale is Baker's crumb rubber production facility in Chamberburg, PA and certain equipment at the South Bend production plant.
They are bend angle, consistency of the bend angle, flange length, parallelism along the bends, and hole position relative to the bend line or the edge of the plate.
But in severe cases, the hardened plaque reduces flexibility, causing pain and forcing the penis to bend or arc during erection.
Bend your knees, tighten your stomach muscles and use your leg muscles to lift and/or pull.