In the kit, you get two trigger springs to adjust total
pull weight. The instructions claim 4 1/2 pounds for the lighter spring (which comes installed on the trigger) and six pounds for the heavier one.
While reduced power springs will give a lighter
pull weight, reliability with hard Mil-Spec primers can be compromised so take that into consideration before using lighter springs.
trigger
pull weight. It hadn't, changed--5 pounds even.
The Lyman gauge showed the actual
pull weight of the test pistol was 9 pounds, 9 ounces.
The actual
pull weight was 9 pounds, 15.5 ounces on a Lyman digital pull gauge, and the range was 11.5 ounces.
This can all be done without removing the unit from the receiver if you decide you want to change the
pull weight you initially dialed in.
The Model 700 XCR II also has the X-MARK PRO trigger, factory set at 3 1/2 lbs., which is externally adjustable for trigger
pull weight.
It has also been designed so that the
pull weight is distributed over the entire hand and grip.
Adjusting the trigger
pull weight is a simple matter of turning the Allen wrench.
Take up slack of the uncocked trigger showed a
pull weight of 21 ounces, which is trigger spring tension taken up before the back surface of the trigger even makes contact with the forward tip of the sear which actually releases the hammer on firing.
None of the experienced shooters on the test team felt the weight affected their hit potential with it and all found it to have a clean break (the Kimber website lists the
pull weight spec for the Micro 9 at 7 pounds).
The AKT-Enhanced trigger has a trigger
pull weight that is even lighter and has a much crisper break, which is ideal for precision and match shooting.
The P320 shares the barrel, grip and magazine with the P250, but where the P250 stumbled (trigger
pull weight and quality) the P320 shines.
Double action first shot trigger
pull weight is spec'd by the factory at 10 pounds double action, four pounds single action.
The military specs for the rifle call for a minimum 5.5-pound trigger
pull weight, and most mil-spec AR trigger components provide a gritty six- to eight-pound pull.