However, these were slip modulus in the pull-in test when the
embedment length of the deformed bar was 200 mm.
Laboratory simulation of the
embedment phenomenon consists in placing a proppant between two cylindrical rock core (Fig.
When the
embedment length exceeds 1100 mm, and the distance of the
embedment location from the crest is greater than S = 2D, the responses for sloping ground are similar with those for the horizontal ground.
The effect of the vertical location is noted at Figure 9 where the higher state of quantity was recorded when the cavity is located at the same level of an
embedment depth of the sheet pile (i.e., at Yu=300mm) and then dramatically decreases with farthest location.
Combining (4) and (5), the
embedment depth can be obtained:
We consider the problem of the bending of an infinite plate (-[infinity] < x,y < [infinity]), containing a cross-shaped, thin, absolutely rigid
embedment ([absolute value of (x) [less than or equal to] a,x = 0).
This method partitioned higher and lower QLs into blocks, and then a reversible method is applied to these blocks for data
embedment. Chen et al.
The strength or stiffness of the
embedment varies with the grouping (Howard 2009).
Vaginal ring entrapment, also referred to as encapsulation,
embedment or incarceration, is a recognised complication that is commonly reported in older patients who have either forgotten or neglected their pessary care routine.
Superior Ballistics couples a membrane and proprietary
embedment process greatly reinforcing precast members typically fabricated at 2-in.
2012); regenerated arms, columns and spines (e.g., Oji 2001; Baumiller & Gahn 2004; Gahn & Baumiller 2005); organisms contained within pits in crinoid stems (e.g., Franzen 1974; Warn 1974; Welch 1976); and predatory or parasitic borings and
embedment structures (e.g., Brett 1978, 1985; Baumiller 1990).
Bucket diameters of 20, 30, and 40 cm and various
embedment ratios were considered for the mechanical tests.
However, because most of the studies have focused on a single purpose such as robustness or mass
embedment, there is the need for a study considering all aspects of the problem, including robustness, algorithm security, and extraction performance.
There are few studies on the process of nanodiamond
embedment into a Sn plate in the lapping process.